* Credit *Be in business honestly, treat clients sincerely, take creating value for consumers as mission, mutual benefit, achieve win-win.


Home > Products > Colloid mill

Product Information[1][2][3][4]  [ Scope ]  [ Instructions for use ]  [ Technical parameters ]  [ Operation principle ]  [ Overall dimension ]  [ Application ]  [ Manual ]  [ Technical parameter ]

Colloid accessories - Bearings

Colloid accessories - Bearings

Hao Star CN.HAOSTAR cards - colloid main bearings, colloid mill accessories, and stainless steel, semi-steel and super alloy steel (I am using special patented technology developed) colloid and other components, and material contact parts are all using the 304, 316 stainless steel. From the morphology can be divided into two kinds of vertical colloid mill and colloid split. Processing capacity from the laboratory level to cover large-scale production line applications.
Colloid mill grinding grinding through (dynamic and static disc) made of stainless steel or Jin Gangyu infiltration WC abrasion resistant corundum head infiltration WC, WC resistant corundum grinding infiltration, seepage WC wear plate, magic grinding wear, hardness HL800 wear plate) of the two toothed surfaces of the relative movement, a toothed surface speed rotation, a stationary fluid or semi-fluid material is greatly by the shearing force and the friction force and the high-frequency vibration, vortex, etc. Multi force of the complex is effectively dispersed, floating of the film, grinding, homogenization, to meet the demand for the product obtained. Colloid accessories mainly by the coupling, shaft, bearings, cooling device, the control valves, mechanical seals (different production periods, the use of mechanical seals and mechanical seals mechanical seals are not the same performance, mechanical seals (2003-2009), mechanical Seal (2000-2003) mechanical seal (1989-1999), the hopper according to the different needs of users, the hopper is also divided into: heated hopper, closed hopper, small colloid mill hopper, stainless steel hopper) circulation device, O-ring, compensation device, grinding (lap movement - including a stator, a rotor combined into grinding (movement disc) made of stainless steel or Jin Gangyu infiltration WC abrasion resistant corundum head infiltration WC, WC resistant corundum grinding infiltration, seepage resistance WC millstones, grinding James Bond wear, hardness HL800 wear plate), adjust dials, positioning device, propeller, rotary vane knife, stand, stand, stalls water dish, motors, material inlet and outlet protection devices, cabinet , inverter, remote monitoring (general user-configurable) and other components. (Coupling - Main Shaft - axis control - body couplings - colloid Accessories)

Colloid according to material processing requirements, can be one or more grinding, polishing should be done before several experiments to ensure optimum clearance and traffic.
Before use to always pay attention to the work of grinding, the running time. If irregularities should be immediately shut down, open the inspection.
Colloid mill grinding (the stator) assembly parts disassembly (Please note that the stator assembly grinding one, two, three absolutely can not break down). First remove the hopper removed out of the tap, loosen the cap screws and remove the dial, grip handle, remove kcal disc counterclockwise rotation, lift the bonnet to grind out the stator assembly.
Removing the rotor assembly (Please note a rotor assembly, two rotor must not decompose). The stators made, remove the spout unscrew the left screw rotor and impeller can be removed. The rotor and stator assembly according to the reverse order of the above, the assembly should be cleaned prior to each part. Installation, you need the threaded portion of the contact surface and meet the requirements of oil painting after assembly.
Colloid mill with the completion or short term do not be good cleaning cavity to prevent corrosion, it is best to use high-pressure air dry. Depending on the materials when cleaning the appropriate choice of cleaning agent, but should ensure that no damage colloid accessories seals (seal material NBR).
Disassembly should pay attention not to damage the seals, the wrong equipment and loss.
Press the desired number of revolutions replace the pulley, first loosen the motor cover end nut along the horizontal direction, to the grinding direction to promote motor, the V-belt to relax, the machine down, then unscrew the nut on the spindle and motor shaft clamping screws , remove the original pulley. Replace the required pulley by hand hammer to gently knock, can not be forced to hit, in order to avoid damage to the pulley, destruction machine precision. After changing, with nuts and screws, and then the machine gently raised. After the machine is erected, the motor is driven along a horizontal direction, so that the the triangle belt tensioning, and then a good cover.
The mechanical seal device Colloid Colloid relates to improvement of the mechanical seal device configuration. It includes drive ring, driving seat, springs, rotating ring, rotating ring, stationary ring, static seals. The main technical features are driving seat with drive slot on the drive ring claw set the appropriate drive; driving seat in the inner surface of three earrings. Colloid mill mechanical seals utility models long life, smooth transmission, can reduce scrap loss characteristics.