* Credit *Be in business honestly, treat clients sincerely, take creating value for consumers as mission, mutual benefit, achieve win-win.

Products

Home > Products > Mixer

Product Information:[1]  [ Instructions for use ]  [ Scope ]  [ Working principle ]  [ Technical parameters ]  [ Application ]  [ Working principle ]  [ Technical Parameter ]

Technical parameters

Technical parameters

The basic parameters of the mixer

Table 1 Basic parameters of the mixer

Type

Power supply

V

Frequency

Hz

Motor power

kW

Motor speed

r/min

Production capacity

t/h

MC-18-2

380

50

15

2930±20

18~22

 

 

 

 

Working conditions
Mixer in the following work environment conditions should be able to work properly:
a) Ambient temperature: -15 ℃ ~ +40 ℃;
b) Relative humidity: 35% ~ 90%;
c) Altitude: 2000 m or less.

The main technical indicators 

Table 2 The main technical indicators mixer

No.

Index name

Claim

1

Mixer Host

The wall thickness of the housing mm

Not less than5

Housing wall roughness μm

Ra to be less than 0.8

Housing sealing performance MPa

Maximum operating pressure 0.2 does not leak, does not distort

2

Spindle

Runout mm 

≤0.06

Hardness HB

~245

3

Speed ​​Master Speed r/min

2500

4

Impeller

Diameter mm

198

Thickness mm

50

Hardness HB

200~245

5

Powder inlet tube

Path? mm

150

Wall thickness mm

4.0

6

Liquid inlet pipe

Path mm

40

Wall thickness mm

4.0

7

Emulsified or mixed material outlet pipe

Path mm

65

Wall thickness mm

3.0

8

Water-cooled mechanical seal performance cooling system MPa

Maximum operating pressure 0.2 does not leak, does not distort

 

 

 

 

 

 

 

 

 

 

 

 

Safety Equipment:Power system user shall also include overheating, phase, shields and other protective devices.

Note: The table refers to the medium flow range "water" when the measured data. Material viscosity and concentration making the flow will produce changes in the relative power is also a difference. This series of short-range feeding capacity, no self-priming capabilities are required to use the high feed; material viscosity or solid content resulted in the normal feeding and conveying, shall use pressure or transfer pump material, pump pressure and flow with the selected machine match the type.
* Product does not affect the basic structure and performance improvement without notice. (Hao Star New 2010 version)